278
CHAPTER 4
Using the Gateway
Figure 323. Sensor details - OC
•
Output channel - enter the output channel for the OC sensor
SDI
Allows entries for SDI sensors:
Figure 324. Sensor details - SDI
•
Bus address - enter the address of the SDI sensor;
•
Method - enter the method of the SDI sensor;
•
Index - enter the index of the SDI sensor;
•
Use CRC - check the box for using a CRC (Cyclic Redundancy
Check) for controlling the SDI communication.
Note: If you want to learn more about SDI-12, visit the the website
of the SDI-12 Support Group, "http://www.sdi-12.org/".
Calibration
Figure 325. Sensor details - Calibration