Table of Contents
Advertisement
Figure 179. Sensor tables
The "Sensor tables" window provides the following window areas:
•
Name - allows you to enter a unique name for each
conversion table to be determined; later, in the Sensor Type
window, the conversion of the data of a sensor (also referred
to as "the linearization of a sensor") can be performed under
this name;
•
Type - allows you to select the type of interpolation to be
used:
Figure 180. Type of Interpolation
•
linear - a linear interpolation is used, i.e. an intermediate
value is calculated according to the ratio of the distances
to the neighboring values contained in the table;
CHAPTER 4
Sensor Type Configuration
173
Advertisement
Table of Contents
