Table of Contents
Advertisement
Note: No special entries are provided for internal sensors.
Different window areas are displayed for internal, LC, OC and SDI
sensors:
Raw
Allows entries for analog, counter and digital sensors:
Figure 321. Sensor details - Raw
•
Sampling method: - select which method has to be used for
this sensor;
•
Cabling - the pin of the connector of the RTU the sensor cable
is connected with (for a description of the connectors, refer to
the addIT and addWAVE user manuals).
Note: The default cabling for each sensor type ist defined in "Sen-
sor Type Configuration".
LC
Allows entries for logical channel sensors:
Figure 322. Sensor details - LC
•
Logical channel - enter the logical channel of the LC sensor.
OC
Allows entries for output channel sensors:
CHAPTER 4
RTU Network Configuration
277
Advertisement
Table of Contents
