Figure 103. SSH Tunnel - Job scheduling - Mode
•
Mode - This combo box is used for determining details of the
SSH tunnelling; the following selections are offered:
•
dhcp reconfig - a SSH tunnelling has to be performed
after changes of dhcp settings made in the tree window
"Networking";
•
never - a SSH tunnelling must never be performed
automatically;
•
ppp connect - a SSH tunnelling has to be performed
after connection to the internet through PPP dialup;
•
interval - a SSH tunnelling has to be performed in certain
regular time intervals. In doing so, the interval in seconds
has to be put into the field "Interval [s]":
Figure 104. SSH Tunnel - Job scheduling - Mode - Interval
•
always - to force a SSH tunnelling to be always
established;
•
times - to force a SSH tunnelling to be etablished at
specific times:
109
CHAPTER 3