Table of Contents
Advertisement
Figure 186. Sensor type - Common settings - Icon - Analog
Note: If you cannot find a suitable engineering unit or icon for your
sensor, ask your Adcon Telemetry distributor for support.
•
Technology - make the appropriate selection in the combo
box "Technology" (in this case, "analog"):
Figure 187. Sensor type - Common settings - Technology - Analog
Analog sensor settings
Figure 188. Sensor type - Analog sensor settings
•
Cabling - the pin of the connector of the RTU the sensor cable
is connected with (for a description of the connectors, refer to
the addIT and addWAVE user manuals );
CHAPTER 4
Sensor Type Configuration
179
Advertisement
Table of Contents
