124
CHAPTER 3
Configuring the Gateway
Figure 126. NTP Detail - Job scheduling - Mode - Times
Job status
"Job status" allows you to check the time and the result of the last
time synchronization:
Figure 127. NTP Detail - Job status
•
Last run - displays the point in time when the last time
synchronization took place;
•
Last result - displays the result of the last time synchronization;
•
Next run - displays the point in time of the planned next time
synchronization.
Job dependent settings
Allow to determine which method of time synchronization is to be
used by the Gateway acting as NTP server towards its clients: