Table of Contents
Advertisement
156
CHAPTER 3
Configuring the Gateway
•
dhcp server - the A850 acts as a DHCP server for other
devices within the LAN;
Note: Use the A850 as a DHCP server only if there is no other
active DHCP server within your LAN.
•
static - the A850 works with fixed (static) IP address which
you have to set according to the topology of your
network. If the topology of your netzwork should be
changed, it may become necessary that you also change
manually the static IP address;
•
IP address - enter the IP address of your A850;
•
Netmask - enter the network mask (a bitmask which separates
an IP address in a network part and a device part);
•
Router - enter the IP address of your default gateway wich is
acting as a router;
•
Broadcast address - enter the IP address for your broadcasts
(transmission of information to all subscribers of a net).
Console Settings
Figure 165. Network detail - Console Settings
•
Console local address - determine which IP address your
A850 has to use for serial direct link via the console interface;
•
Console remote address - determine which IP address the
remote PC has to use for serial direct link with your A850 via
the console interface.
Advertisement
Table of Contents
