Table of Contents
Advertisement
Figure 124. NTP Detail - Job scheduling - Mode
•
dhcp reconfig - a time synchronization has to be
performed after changes of dhcp settings made in the
tree window "Networking";
Note: The input of time and date (in local time) is made in Tools
Commands - Time Configuration described in chapter 2.
•
never - a time synchronization is not performed
automatically;
•
ppp connect - a time synchronization has to be
performed after connection to the internet through PPP
dialup;
•
interval - a time synchronization has to be performed in
certain regular time intervals. In doing so, the interval in
seconds has to be put into the field "Interval [s]":
Figure 125. NTP Detail - Job scheduling - Mode - Interval
•
always - a time synchronization has to be performed
always;
•
times - a time synchronization has to be performed at
certain fixed times:
123
CHAPTER 3
Advertisement
Table of Contents
