122
CHAPTER 3
Configuring the Gateway
•
Job scheduling - allows to define a time schedule ("Mode") to
which time the A850 has to perform a time synchronization as
client and/or server;
•
Job status - for information at which time the last time
synchronization has been performed and with which success,
as well as at which time the next time synchronization is
planned;
•
Job dependent settings - allow to define time synchronization
measures for the clients of the Gateway;
•
Primary Server - allows to define the primary NTP server;
•
Secondary Server - allows to define the secondary NTP server.
Job scheduling
Note: The job scheduling layed down can be oversteered by the
commands "Start Job" or "Stop Job" according to Fig. 43
or 46, respectively.
Figure 123. NTP Detail - Job scheduling
Within "Job scheduling", the pull down menu "Mode" provides
the following set-ups to start establishing contacts to NTP servers:
•
Mode - This combo box is used for determining details of the
time synchronization; the following selections are offered: