•
Log all polls - allows you to determine if you want your dialup
requests to be registered in the Logs.
Dialup status
Figure 136. Dialup modem - Dialup status
Provides information about the status of the dialup connection:
•
Detected - shows if a modem is connected correctly or not;
•
Connected - shows if a connection via the modem exists;
•
Pin set - shows that your modem requires a PIN code;
•
Number of RTUs - shows how many RTUs can be reached via
this dialup connection:
Job dependent settings
Figure 137. Dialup modem - Job dependent settings
•
Allow send SMS - by clicking this checkbox, you determine
that your modem may transmit SMSs (This selection makes
sense only if your phone provider supports SMS);
•
Allow dial-in - by clicking this checkbox, you permit that
connections may be established for incoming calls;
•
Allow PPP dialup - by clicking this checkbox, you permit that
the modem may be used for PPP Dialup networking.
PPP parameter
If you allow dial-in, you have to enter the information specified
below into the respective fields:
131
CHAPTER 3