162
CHAPTER 3
Configuring the Gateway
•
Ping interval - the interval within the status data of the A850 is
stored (minimum is 60 seconds, maximum is 10800 seconds
and the default is 900seconds, or 15 minutes);
•
Latitude [°] - declaration of the latitude of the location of the
A850 (in degrees);
•
Longitude [°] - declaration of the longitude of the location of
the A850 (in degrees);
•
Altitude [m] - declaration of the altitude of the location of the
A850 (in meters).
State
Figure 173. Gateway detail - State
•
First slot - displays the time stamp of the oldest data of the
gateway of your A850 after the last refresh;
•
Last slot - displays the time stamp of the newest data of the
gateway of your A850 after the last refresh;
•
Last ping - displays the timestamp of the status data of the
A850;
•
Last poll - displays the timestamp of the newest sensor data of
the A850;
•
Highest node ID - when RTUs are defined, each RTU will be
assigned automatically an unique ID. These IDs are numbered
consecutively, and here, the highest number of a RTU ID in
your RTU net is displayed;