Table of Contents
Advertisement
116
CHAPTER 3
Configuring the Gateway
•
Mode - This combo box is used for determining details of
notification sending; the following selections are offered:
•
dhcp reconfig - a notification sending has to be
performed after changes of dhcp settings made in the
tree window "Networking";
•
never - a notification sending must never be performed
automatically;
•
ppp connect - a notification sending has to be performed
after connection to the internet through PPP dialup;
•
interval - a notification sending has to be performed in
certain regular time intervals. In doing so, the interval in
seconds has to be put into the field "Interval [s]":
Figure 114. Send NTF Detail - Job scheduling - Mode - Interval
•
always - a notification sending has to be performed
always;
•
times - a notification sending has to be performed at
certain fixed times:
Figure 115. Send NTF Detail - Job scheduling - Mode - Times
Note: if no connection to a notification server is established, the
notifications will be buffered in a queue and after establish-
ing a notification connection, the notifications will be for-
warded to the notification addressee.
Advertisement
Table of Contents
