Table of Contents
Advertisement
136
CHAPTER 3
Configuring the Gateway
nite reasons to determine other parameters (e.g., another
radio frequency for the communication with your RTUs).
•
Modem-Type dependent settings - allow to determine if
notifications or logging, respectively, should take place, to
define the interval for slots (the slot interval specifies how
often internal sensor values are stored) and to define ping
intervals (a ping is an action which is intended to reveal the
arrival time of a message from one computer to another).
Device parameter
Figure 141. Wireless Modem - Device parameter
•
Name - for giving each Wireless Modem an unique name;
•
Device - as a Wireless Modem can be connected to the serial
"Radio Modem" connection or directly via USB connection as
well as indirectly via an USB hub, the corresponding
connection is to be selected here;
Note: This is a feature reserved for new types of Wireless Modems
which may become available in the future. The A440 can be
connected only via the A440 interface.
Figure 142. Wireless Modem - Device parameter - Device
Advertisement
Table of Contents
