Command Syntax - D-Link DES-2108 User Manual

The Switch will then display the telnet interface CLI command
prompt:

Command Syntax

The following symbols are used to describe how command entries are
made and values and arguments are specified in this manual. The
online help contained in the CLI and available through console
interface uses the same syntax.
Note: All commands are case sensitive. Be sure to disable Caps Lock
or any other unwanted function that changes text case.
<angle brackets>
Purpose
Syntax
Description
Example
Command
[square brackets]
Purpose
48
Figure 43. DES-2108 CLI command prompt
Encloses a variable or value that must be
specified.
show stp ports <portlist>
This command displays the STP group of
configuration on the Switch.
show stp ports 1-5
Encloses a required value or set of required
arguments. One value or argument can be
specified.