D-Link DES-2108 User Manual page 100

create smac (802.1Q)
Purpose
Syntax
Description
Parameters
Example usage:
To create a unicast MAC FDB entry:
94
Used to create a static entry to the unicast MAC
address forwarding table (database).
[mac <macaddress> port <port no.> vid <vid>
| idx <mac address index list on smac>]
This command allows you to create a static MAC
entry in the forwarding table for the specified
VLAN.
mac <macaddress> - The MAC address that will
be added to the forwarding table.
port <port
corresponding to the MAC destination address.
The Switch will always forward traffic to the
specified device through this port.
vid <vid> - Specific the 802.1Q VLAN ID to the
port.
idx <mac address index list on smac> - Added
to the forwarding table for smac list.
Figure 95. create static MAC address to FDB
no.> - The port number