Configuration > Port Mirroring - D-Link DES-2108 User Manual

Path Priority: Select a value between 0 and 255 to specify the
priority for a specified port for forwarding packets: the lower the
value, the higher the priority. The default is 128.
To refresh the information table and view the latest status, press the
Refresh button.
Configuration > Port Mirroring
Port Mirroring is a method of monitoring network traffic that
forwards a copy of each incoming and/or outgoing packet from one
port of the Switch to another port where the packet can be studied.
This enables network managers to better monitor network
performances.
Figure 31. Configuration > Port Mirroring
Selection options for the Source Ports are as follows:
TX (transmit) mode: Duplicates the data transmitted from the source
port and forwards it to the Target Port.
RX (receive) mode: Duplicates the data that gets sent to the source
and forwards it to the Target Port.
Both (transmit and receive) mode: Duplicate both the data
transmitted from and data sent to the source port, and forwards all the
data to the assigned Target Port.
None: Turns off the mirroring of the port.
38