Static Mac Commands - D-Link DES-2108 User Manual

Static MAC Commands

The layer 2 forwarding database commands in the Command Line
Interface (CLI) are listed (along with the appropriate parameters) in
the following table.
Command
config auto_learning
show smac
show fdb
create smac (802.1Q)
delete smac
Each command is listed, in detail, in the following sections.
config auto_learning
Purpose
Syntax
Description
Parameters
Example usage:
91
Parameters
[on ports <port_list | null> | off ]
port <port no.>
[mac <macaddress> port <port> vid
<vid> | idx <mac address index list
on fdb>]
[mac <macaddress> | idx <mac
address index on smac>]
Used to enables or disables the MAC address
learning on the specified range of ports.
config auto_learning [on ports <port_list |
null> | off]
This command allows you to enables or disables
the MAC address learning on the specified range
of ports.
null<null> disables auto_learn on all ports.