D-Link DES-2108 User Manual page 56

Command
show switch
reset
logout
save
config
system_contact
config
system_name
config
system_location
config
system_agingtime
config
system_timeout
Each command is listed, in detail, in the following sections.
show switch
Purpose
Syntax
Description
Parameters
Example usage:
To display the Switch's information:
50
Parameters
<config>
<system_contact 96>
switch
<system_name 20>
switch
switch <system_location 20>
switch < value 0~1000000 sec>
<value 3~30 min>
switch
Used to display general information about the
Switch.
show switch
This command displays information about the
Switch.
None.