Example usage:
To display the status of all trunk group:
SNTP Commands
The SNTP commands in the Command Line Interface (CLI) are listed
(along with the appropriate parameters) in the following table.
Command
enable sntp
disable sntp
show sntp
create sntp_server
delete sntp_server
show sntp_server
enable sntp_dst
disable sntp_dst
config
timezone
config sntp_dst from/to
99
Figure 101. show link_aggregation command
sntp_dst
Parameters
ipaddress <ipaddress> port <port>
idx <index 1-10>
offset
<30|60|90|120>
<±HHMM>
week <first-last> day <mon-sun>
month <month> time <HHMM>
config sntp_dst timezone offset
time