Device Setting - D-Link DES-2108 User Manual

Note: In order to receive Trap information, the switch has to be
configured with Trap IP and Trap Events in Web browsers, which
are available in the Trap Setting Menu (See the appropriate sections
of this Guide for details).
Add Item:
To add a device to the Monitor List manually, enter the
IP Address of the device that you want to monitor.
Delete Item:
To delete the device in the Monitor List.

Device Setting

You can set the device by using the function key in the Device Setting
Dialog box.
Change Settings:
In Change Settings, you can set the IP Address, Subnet Mask,
Gateway, Set Trap to (Trap IP Address), System name, Location,
Password, Group Interval and DHCP setting.
In factory default, the IP address of the DES-2108 will be
automatically assigned from DHCP server (DHCP enabled). If your
network has no DHCP server, the DES-2108 will fail to get IP address,
and the IP address of DES-2108 will be assigned to default IP address
of 192.168.0.1 and netmask is 255.255.255.0.
Select the device in the Discovery List or Monitor List and press the
"Change settings" button, then the Configuration Setting window
will pop up as shown in Figure 8. After filling in the data that you
want to be changed, you must input the password and press the "Set"
to process the data change.
16