D-Link DES-2108 User Manual page 106

Each command is listed, in detail, in the following sections.
enable sntp
Purpose
Syntax
Description
Parameters
Example usage:
To enable SNTP server support for the switch:
disable sntp
Purpose
Syntax
Description
Parameters
Example usage:
To disable SNTP server support for the switch:
100
<30|60|90|120> time <±HHMM>
config sntp_dst from/to day <day>
week <week> month <month> time
<HHMM>
Used to enable SNTP support.
enable sntp
This command is used to enable SNTP server
support .
None.
Figure 102. enable sntp command
Used to disable SNTP support.
disable sntp
This command is used to disable SNTP server
support .
None.