D-Link DES-2108 User Manual page 108

Parameters
Example usage:
To add SNTP server 192.168.0.100 into server list:
delete sntp_server
Purpose
Syntax
Description
Parameters
Example usage:
To remove SNTP server 01 from server list:
show sntp_server
102
<ipaddress> - The IP address of SNTP server
<port number 1~65535> - The UDP port
number of SNTP server
Figure 105. create sntp_server command
Used to remove SNTP server from server list.
delete sntp_server idx <index 1-10>
This command is used to remove SNTP server
from server list.
<index 1-10> - The sntp server index in server
list
Figure 106. delete sntp_server command