Configuration > Trunk - D-Link DES-2108 User Manual

Figure 24. Configuration > 802.1Q VLAN > VID Configuration
Configuration > 802.1Q VLAN Management VLAN
This allows to select a VLAN from which a management station will
be allowed to manage the Switch using Web or Telnet. Management
stations that are on VLANs other than the selected one will not be
able to manage the Switch. By default, the management VLAN is
disabled, so any management station that can connect to the Switch
can access the Switch until a management VLAN is specified.
Figure 25. Configuration > 802.1Q VLAN Management VLAN
Configuration > Trunk
The Trunking function enables the cascading of two or more ports for
a combined larger bandwidth. Up to six Trunk groups may be created,
each supporting up to 8 ports. Add a Trunk Name and select the
ports to be trunked together, and click Apply to activate the selected
Trunking groups.
Figure 26. Configuration > Trunk
NOTE: Each combined trunk port must be connected to devices
within the same VLAN group.
32