D-Link DES-2108 User Manual page 107

show sntp
Purpose
Syntax
Description
Parameters
Example usage:
To display SNTP status of the switch:
create sntp_server
Purpose
Syntax
Description
101
Figure 103. disable sntp command
Used to display SNTP status.
show sntp
This command is used to display SNTP status .
None.
Figure 104. show sntp command
Used to add.SNTP server
information will be taken, the maximum SNTP
server number is 10.
create sntp_server ipaddress <ipaddress>
port <port number 1~65535>
This command is used to
which the SNTP information will be taken.
which the SNTP
add.SNTP server