config switch system_contact
Purpose
Syntax
Description
Parameters
Example usage:
To configure the Switch contact to "arthur":
config switch system_name
Purpose
Syntax
53
Figure 47. save command
Used to enter the name of a contact person who
is responsible for the Switch.
config switch system_contact
<system_contact 96>
The config snmp system_contact command is
used to enter the name and/or other information
to identify a contact person who is responsible
for the Switch.
<system_contact 96> - A maximum of 96
character can be used, space character is not
allowed.
Figure 48. config switch system_contact command
Used to configure the name for the Switch.
config switch system_name <system_name
20>