VLAN Commands
The VLAN commands in the Command Line Interface (CLI) are
listed (along with the appropriate parameters) in the following table.
Command
create vlan
delete vlan
config vlan
show vlan
Each command is listed, in detail, in the following sections.
create vlan
Purpose
Syntax
Description
61
Figure 56. show ports command
Parameters
create vlan tag <vid 1~4094> desc
<vlan_name 20>
delete vlan tag <vid 1~4094>
config vlan vid <vid 1~4094> {add
[tagged
<port_list>
show vlan {tag <vid 1~4094>}
Used to create a VLAN on the Switch.
create vlan tag <vid 1~4094> desc
<vlan_name 20>
This command allows you to create a VLAN on
the Switch.
|
untagged]
|
delete}