D-Link DES-2108 User Manual page 104

Purpose
Syntax
Description
Parameters
Example usage:
To configure port 1~4 to "trunk1" group:
show link_aggregation
Purpose
Syntax
Description
Parameters
98
Used to configure trunk groups.
config link_aggregation group_id <group_id
1-4> ports <port_list | null > desc <trunk name
20>
This command is used to
groups.
<group_id 1-4> - Specify which trunk group to
configure
<port_list> - Configure a port or range of ports to
add to the selected trunk group
<null > - Remove all ports from the selected
group
<trunk name 20> - The name of trunk group to
be created. A maximum of 20 characters can be
used.
Figure 100. config link_aggregation command
Used to display trunk groups status.
show link_aggregation <group_id 1-4>
This command is used to display trunk groups
status.
<group_id 1-4> - Specify which trunk group to
display
configure trunk