D-Link DES-2108 User Manual page 90

disable igmp_snooping
show router_ports
show
group
config igmp_snooping
Each command is listed, in detail, in the following sections.
config router_ports
Purpose
Syntax
Description
Parameters
Example usage:
To set up static router ports:
84
igmp_snooping
Used to configure ports as router ports.
config router_ports [add | delete] <vid>
<port_list>
This command allows you to designate a range
of ports as being connected to multicast-enabled
routers. This will ensure that all packets with
such a router as its destination will reach the
multicast-enabled router − regardless of protocol,
etc.
add / delete - Add or delete the specifies a port
or range of ports that will be configure as router
ports.
<portlist> - Specifies a port or range of ports that
will be configured as router ports.
{[host_timeout <sec 130-1225> |
router_timeout
query_interval
response_time
robustness_variable <sec 1-255> |
lmquery_interval
leave_time <sec
[enable|disable] vid <vid>}
<sec 60-600>
<sec 60-600>
<sec 10-25>
<sec 1-25>
0-25> ]
|
|
|
|
|