Trap Commands
The trap mirroring commands in the Command Line Interface (CLI)
are listed (along with the appropriate parameters) in the following
table.
Command
enable discovery
disable discovery
config
trap_ip
config
trap_event
delete
trap_event
show discovery trap
Each command is listed, in detail, in the following sections.
enable discovery
Purpose
Syntax
Description
67
Figure 64. show mirror command
Parameters
ipaddress <ip_address>
discovery
discovery
trap_event [bootup | illegal_login |
t_link]
trap_event [bootup | illegal_login |
discovery
t_link |]
Used to the enable the discovery trap function to
SmartConsole Utility.
enable discovery
The command is used to the enable the
discovery trap function to SmartConsole Utility.