System > Trap Setting - D-Link DES-2108 User Manual

System > Trap Setting
By configuring the Trap Setting, it allows SmartConsole Utility to
monitor specified events on this Web-Smart Switch. By default, Trap
Setting is Disabled. When the Trap Setting is Enabled, enter the
Destination IP address of the managing PC that will receive trap
information.
Figure 16. System > Trap Setting
System Event: Monitors the system's trapping information.
Device Bootup: Traps system boot-up information.
Illegal Login: Traps events of incorrect password logins, recording
the IP of the originating PC.
Twisted pair Port Events: Monitors the copper cable port status.
Link Up/Link Down: Traps copper connection information.
24