D-Link DES-2108 User Manual page 76

delete discovery trap_event
Purpose
Syntax
Description
Parameters
Example usage:
To delete the event type from current event configuration of the
Switch:
70
Figure 68. config discovery trap_event command
Used to delete previously configured events of
trap on the Switch.
trap_event [bootup | illegal_login | t_link]
The command is delete previously configured
events of trap on the Switch.
bootup - Enabled the Switch's boot up event.
illegal_login - Enabled the Switch's illegal login
event.
t_link - Enabled the Switch's twisted-pair ports
(port 1 – 8) linking status change event.