Trunk Commands - D-Link DES-2108 User Manual

show host
Purpose
Syntax
Description
Parameters
Example usage:

Trunk Commands

The Trunk commands in the Command Line Interface (CLI) are listed
(along with the appropriate parameters) in the following table.
Command
config link_aggregation
show link_aggregation
Each command is listed, in detail, in the following sections.
config link_aggregation
97
Used to display the trusted host that has been
created.
show host
This command allows you to display the trusted
remote stations to manage the Switch.
None.
Figure 99. show host command
Parameters
group_id
<port_list | null > desc <trunk name
20>
<group_id 1-4>
<group_id 1-4> ports