System > Sntp Settings - D-Link DES-2108 User Manual

Some operating processes have been assigned Facility values.
Processes that have not been explicitly assigned a value may use any
of the "local" facilities.
Figure 20. System > Syslog
System > SNTP Settings
Enabled / Disabled: Default setting is Disabled. Click Enable, then
Apply, to configure the SNTP Settings.
Daylight Saving Time State: Default setting is Disabled. Click Enable
to configure the below time parameters.
To add a new SNTP Server, press Add SNTP Server and enter the
desired IP address, then press Apply.
29