Trusted Host Commands
The Trusted Host commands in the Command Line Interface (CLI)
are listed (along with the appropriate parameters) in the following
table.
Command
create host
delete host
show host
Each command is listed, in detail, in the following sections.
create host
Purpose
Syntax
Description
Parameters
Example usage:
To create trusted host:
95
Parameters
[ipaddress <ipaddress>/<ipmask>]
[ipaddress
<trusted host index>]
Used to create the trusted host.
[ipaddress <ipaddress>/<ipmask>]
This command is used to permit remote stations
to manage the Switch.
ipaddress <ipaddress>/<ipmask> - IP address
and netmask of the IP interface to created. You
can specify the address and mask information
using
192.168.100.100/255.255.255.0
format 192.168.100.100/24.
Figure 96. create host command
<ipaddress>
traditional
or
|
idx
format
in
CIDR