D-Link DES-2108 User Manual page 117

Figure 117. enable 802.1x command
disable 802.1x
Purpose
Syntax
Description
Parameters
Example Usage:
Figure 118. disable 802.1x command
config radius
Purpose
Syntax
Description
Parameters
111
Used to disable 802.1x on the switch
Disable 802.1x
This command allows you to disable 802.1x
None.
Used to configure the radius of 802.1x on the
switch.
<IP> port <port> key <key>
This command allows you to configure the radius
of 802.1x the switch.
IP <IP> - assigns a radius server according to
the host IP address
port <port> - the port number corresponding to
the radius server
key <key> - assigns the key to the radius server