Adding Ipsi Information - Avaya S8700 Installation Instructions Manual

1
Type
change system-parameters ipserver-interface
change system-parameters ipserver-interface
SERVER INFORMATION
Primary Control Subnet Address: 198.152.254.
Secondary Control Subnet Address: 198.152.255.
OPTIONS
IPSI Control of Port Networks: enabled
2
Verify that the Primary and Secondary Subnet Addresses are correct.
The subnet addresses must match the most significant 3 octets (the first three groups of digits in
the subnet address) of the Server IP address.
An asterisk (*) to the right of the
displayed, it is not the correct one; the Avaya Communication Manager does not have the subnet
information. After verifying the displayed information, submit this form with or without changes
to update the Communication Manager with the correct subnet information.
3
Set the
4
Set the
5
Press Enter to effect the change.

Adding IPSI information

1
Type
add ipserver-interface PNnumber
information.
Installing the Avaya S8700 Media Server with an Avaya G650 Media Gateway
December 2003
IP SERVER INTERFACE (IPSI) SYSTEM PARAMETERS
IPSI Host Name Prefix: vodka
Switch Identifier: A
Subnet Address
CAUTION:
If the information displayed in the
Control Subnet Address
Use the Maintenance Web Interface; under Server Configuration and Upgrades, click
Configure Server to change the media server configuration. Then return here to perform
this step.
Switch Identifier: field to the switch ID letter (A thru J; A is the default setting).
IPSI Control of Port Networks:
NOTE:
The information you provide differs, depending on whether the IPSIs get static addresses
or they are assigned automatically through DHCP.
and press Enter.
0 *
0 *
field means that although a subnet address is
Primary Control Subnet Address
fields is not correct, it must be changed on the media servers.
field to enabled.
and press Enter to add the IPSI circuit pack
Customizing the media server
Page 1 of 1
and/or
Secondary
55