Completing The Installation Administration; Verifying Translations; Setting Daylight Savings Time Rules - Avaya S8700 Installation Instructions Manual

Completing the installation administration

Completing the installation administration
This section covers the following tasks:
•
Verifying translations
•
Setting daylight savings time rules
•
Setting locations (if necessary)
•
Verifying date and time
•
Viewing alarms
•
Enabling and disabling Ethernet switch ports
•
Backing up the media server to PCMCIA flashcard
•
Telneting to media server
•
Enabling alarms to INADS via modem
•
Enabling alarms to INADS via SNMP
•
Enabling alarms to INADS on second server
•
Registering the system

Verifying translations

1
Type
list configuration all
system.
2
Type
list ipsi
3
Check the administration status on the following items:
•
•
•

Setting daylight savings time rules

You can set up to 15 customized daylight savings time rules. If you have media gateways in several
different time zones, you can set up rules for them on a per-location basis. A daylight savings time rule
specifies the exact time when you want to transition to and from daylight savings time. It also specifies
the increment at which to transition.
246
on page 246
on page 247
on page 248
on page 248
on page 253
on page 254
and press Enter to view all the administered circuit packs in the
and press Enter to verify the location of the IPSI circuit packs.
list station
list trunk-group
list hunt-group
NOTE:
Even though you set the date, time, and time zone through the Web interface on the media
server, you also must set the daylight savings time rules and locations and verify the date
and time through SAT commands.
NOTE:
The default daylight savings rule is 0, meaning no daylight savings transition.
Installing the Avaya S8700 Media Server with an Avaya G650 Media Gateway
on page 246
on page 249
on page 251
on page 253
on page 253
on page 254
December 2003