Adding Ipsi Information - Avaya S8500 Installing And Configuring

Adding IPSI information

These steps add the IPSI information to the translations.
1. Type add ipserver-interface PNnumber and press Enter to add the IPSI circuit pack
information.
2. For static addressing, in the Host: field, type in the IP address for the IPSI in the port
network listed in the Location: field.
add ipserver-interface 8
IP Control? y
Primary IPSI
------------
Location:
Host: 172.22.22.174
DHCP ID: ipsi-A01a
Secondary IPSI
--------------
Location:
Host: 172.22.22.175
DHCP ID: ipsi-A01b
3. Set the IP Control? field to y.
4. Verify that all the other fields are populated.
5. Press Enter to effect the changes.
6. Repeat steps
IP SERVER INTERFACE (IPSI) ADMINISTRATION - PORT NETWORK 8
1A01
1B01
1 through 5 for each port network.
Administering the IPSIs
Socket Encryption? y
Enable QoS? y
QoS Parameters
--------------
Call Control 802.1p: 6
Call Control DiffServ: 46
Issue 3.1 June 2005 63