Adding Ipsi Information - Avaya S8500 Manual

Migrating translations
An Asterisk (*) to the right of the
displayed, it is not the correct one; the Communication Manager call processing software does not
have the subnet information. After verifying the displayed information, submit this form with or
without changes to update the Communication Manager with the correct subnet information.
3
Verify that the Switch Identifier is set correctly for this installation. It is critical that the correct
Switch Identifier is entered here before TN2312 IPSI circuit packs are administered.
4
Verify that the
5
Press Enter

Adding IPSI information

1
Type
add ipserver-interface PNnumber
Enter to add the IPSI circuit pack information.
2
When using a DHCP server, verify that the fields associated with the Primary IPSI and Secondary
IPSI (if equipped) are populated with default data.The
DHCP server.
add ipserver-interface 4
IP Control? y
Primary IPSI
------------
Location:
Host: ipsi-A09a
DHCP ID: ipsi-A09a
Secondary IPSI
--------------
Location:
Host: ipsi-A09b
DHCP ID: ipsi-A09b
48
CAUTION:
If the information displayed in the
Control Subnet Address
Use the Maintenance Web Interface; under Server Configuration and Upgrades, click
Configure Server to change the media server configuration. Then return here to perform
this step.
IPSI Control of Port Networks:
to submit the form.
NOTE:
The information you provide differs, depending on whether the IPSIs get static addresses
or they are assigned automatically through DHCP.
IP SERVER INTERFACE (IPSI) ADMINISTRATION - PORT NETWORK 4
9A01
9B01
field means that although a subnet address is
Subnet Address
Primary Control Subnet Address
fields is not correct, it must be changed on the media servers.
field is set to disabled.
where
PNnumber
Host:
Migrating to the Avaya S8700 or S8710 Media Server
and/or Secondary
is the port network number and press
and fields are set by the
DHCP ID:
Page 1 of
Socket Encryption? n
Enable QoS? n
June 2004
1