Testing the complete configuration
Figure 116: Circuit pack LEDs on faceplate
Figure notes
1
Alarm LED (Red)
2
Test LED (Green)
3
Busy LED (Yellow)
DS1 Converter circuit pack LEDs
Eleven LEDs provide an indication of the state of the
LEDs,
on page 285 and the T1/E1 facilities. The top group has the standard red, green and yellow LEDs.
The red LED indicates an alarm condition and the green LED indicates testing in progress. The four
SPAN LEDs indicate the status of the T1/E1 facilities. The four STATUS LEDs currently are unused and
remain off.
284
Installing the Avaya S8700 Media Server with an Avaya G650 Media Gateway
4
Latch Pin
5
Locking Lever
Figure 117, TN1654 DS1 Converter circuit pack
December 2003