Avaya S8700 Installation Instructions Manual page 56

Customizing the media server
2
When using a DHCP server, verify that the fields associated with the Primary IPSI and Secondary
IPSI (if equipped) are populated with default data.The Host: and DHCP ID: fields are set by
the DHCP server.
add ipserver-interface 4
IP Control? y
Primary IPSI
------------
Location:
Host: ipsi-A09a
DHCP ID: ipsi-A09a
Secondary IPSI
--------------
Location:
Host: ipsi-A09b
DHCP ID: ipsi-A09b
When using static addressing, in the
network listed in the
add ipserver-interface 8
IP Control? y
Primary IPSI
------------
Location:
Host: 172.22.22.174
DHCP ID: ipsi-A01a
Secondary IPSI
--------------
Location:
Host: 172.22.22.175
DHCP ID: ipsi-A01b
3
Set the
4
Verify that all the other fields are populated.
5
Press Enter to effect the changes.
6
Repeat steps 1 through 5 for each port network.
56
IP SERVER INTERFACE (IPSI) ADMINISTRATION - PORT NETWORK 4
9A01
9B01
field.
Location:
IP SERVER INTERFACE (IPSI) ADMINISTRATION - PORT NETWORK 8
1A01
1B01
IP Control? field to y .
Installing the Avaya S8700 Media Server with an Avaya G650 Media Gateway
Socket Encryption? n
Host: field, type in the IP address for the IPSI in the port
Socket Encryption? y
QoS Parameters
--------------
Call Control 802.1p: 6
Call Control DiffServ: 46
Page 1 of 1
Enable QoS? n
Enable QoS? y
December 2003