Adding The Ipsi To The System - Avaya S8730 Installing And Configuring

Chapter 5: IP interface translations

Adding the IPSI to the system

Use the IP Server Interface Administration - Port Network SAT screen to add an IPSI. The
information on this screen differs, depending on whether the IP addresses of the IPSI are static
or assigned automatically through DHCP.
1. Type add ipserver-interface PNnumber and press Enter.
2. For the Host field and the DHCP ID fields for the primary IPSI and secondary IPSI, if any:
For dynamic addressing, the DHCP server sets the Host field and the DHCP ID field.
Verify that the fields are populated with default data.
For static addressing, in the Host field, enter the IP address for the IPSI that is listed in
the Location field.
add ipserver-interface 4
Ignore Connectivity in Server Arbitration? n
Primary IPSI
------------
Location:
DHCP ID: ipsi-A09a
Secondary IPSI
--------------
Location:
DHCP ID: ipsi-A09b
add ipserver-interface 8
Ignore Connectivity in Server Arbitration? n
Primary IPSI
------------
Location:
DHCP ID: ipsi-A01a
3. Set the IP Control field to y.
54
Installing and Configuring the Avaya S8700-Series Server
IP SERVER INTERFACE (IPSI) ADMINISTRATION - PORT NETWORK 4
9A01
Host: ipsi-A09a
9B01
Host: ipsi-A09b
IP SERVER INTERFACE (IPSI) ADMINISTRATION - PORT NETWORK 8
1A01
Host: 172.22.22.174
IP Control? y
Administer secondary ip server interface board? y
IP Control? y
Page 1 of
Socket Encryption? n
Enable QoS? n
Socket Encryption? n
Enable QoS? n
QoS Parameters
--------------
Call Control 802.1p: 6
Call Control DiffServ: 46
January 2008
1