Verifying That Ipsis Are Translated; Verifying Connectivity To Media Server; Upgrading Ipsi Firmware Version (If Necessary); Enabling Ipsi Duplication (High Or Critical Reliability Only) - Avaya S8700 Installation Instructions Manual

Verifying that IPSIs are translated

1
Type list ipserver-interface
2
Verify that all ISPI circuit packs are translated.

Verifying connectivity to media server

1
Under Diagnostics, click Execute Pingall and select "Other server(s), All IPSIs, UPS(s), Ethernet
switches" to verify connectivity to these units.
2
Verify that all endpoints respond correctly.

Upgrading IPSI firmware version (if necessary)

You may need to upgrade the firmware on some or all the IPSIs. Each IPSI must be on the same firmware
load.
1
Under Installation and Upgrades, click View IPSI Version.
2
Select "Query All" and click View IPSI Version.
3
Verify the firmware release for each TN2312BP IPSI. If an upgrade is required, follow the
procedures in "Upgrading Software and Firmware," Upgrading IPSI Firmware.
Enabling IPSI duplication (high or critical
reliability only)
If high or critical reliability, you must enable IPSI duplication before enabling IPSI control. Enabling
IPSI duplication requires that all IPSI-connected port networks have both primary (sCNA) and secondary
(CNB) IPSI circuit packs. Disabling IPSI duplication requires that all primary IPSI circuit packs be
active.
1
Type
change system-parameters duplication
Installing the Avaya S8700 Media Server with an Avaya G650 Media Gateway
December 2003
NOTE:
You must be on the active media server to use SAT commands.
and press Enter.
NOTE:
We recommend that you be on the active media server.
Connecting to the IP server interfaces
and press Enter.
187