Testing Expansion Interface Exchange, If Used, For Each Port Network - Avaya S8700 Installation Instructions Manual

Figure 107: Sample test results for TDM bus port network 1
test tdm port-network 1
Port
PN 01A
PN 01A
PN 01A
PN 01B
PN 01B
PN 01B
Testing expansion interface exchange, if
used, for each port network
If the configuration is critical reliability, test the expansion interface exchange for each PN.
1
Type
status port-network number
This displays the standby expansion link. See
expansion link is set,
2
Type set expansion-link UUCSS
standby expansion link, and press Enter.
3
Verify the bottom of the screen displays:
Command successfully completed
4
Type
status port-network number
A screen similar to
270 displays.
5
Verify that the MODEs of the expansion links have changed.
6
If any problems are indicated, check the TDM cables and the inter-cabinet cables (ICC) in the
associated port network.
Installing the Avaya S8700 Media Server with an Avaya G650 Media Gateway
December 2003
TEST RESULTS
Maintenance Name Alt. Name Test No. Result
TDM-BUS
TDM-BUS
TDM-BUS
TDM-BUS
TDM-BUS
TDM-BUS
on page 270.
, where UUCSS is one of the cabinet, and port locations of the
Figure 109, Sample of port network status after expansion link is set,
294 PASS
296 PASS
297 ABORT
294 PASS
296 ABORT
297 PASS
< > and press Enter.
1-64
Figure 108, Sample of port network status before
< > and press Enter.
1-64
Testing the complete configuration
Error Code
1005
1005
on page
269