Avaya S8700 Installation Instructions Manual page 185

4
Type
arp -d 192.11.13.6
responds with one of the following:
•
•
5
Type telnet 192.11.13.6
Prompt = [IPSI]:
6
Type
ipsilogin
7
Log in as craft.
Prompt = [IPADMIN]:
8
Type
set control interface ipaddr netmask
provided IP address and
9
Press Enter to effect the changes.
Installing the Avaya S8700 Media Server with an Avaya G650 Media Gateway
December 2003
and press
The command line prompt when the cache has been cleared.
The phrase: The specified entry was not found. This is returned when the specified IP
address does not currently contain an entry in the ARP cache.
and press Enter to open the Telnet window and connect to the IPSI
NOTE:
While connected to the IPSI, type
two or three letter abbreviations.
and press Enter. (abbreviated command = il)
NOTE:
The craft login used on the IPSI has a different password than the craft login used on the
media servers.
netmask
Connecting to the IP server interfaces
to clear the ARP cache in the laptop. This command
Enter
or to obtain online help. Most commands have
help ?
and press Enter, where
is the customer provided subnet mask.
is the customer-
ipaddr
185