Verifying Date And Time; Viewing Alarms - Avaya S8700 Installation Instructions Manual

Completing the installation administration
2
In the
ARS Prefix 1 Required for 10-Digit NANP Calls?
3
Type the information in the various fields for each media gateway.
4
Press Enter to effect the changes.

Verifying date and time

1
Type display time
display time
DATE
TIME
WARNING: Changing the date or time may impact BCMS, CDR, SCHEDULED
2
Verify that the date and time are correct.
3
Verify that the correct rule (number) is displayed in the
4
If correct, press
5
If not, go to the Maintenance Web Interface.
6
Under Server, click Set Server Time/Timezone.
7
Verify that the date and time are correct. If not, set it here.
8
Repeat steps 1 through 3.

Viewing alarms

1
Click Current Alarms to clear any alarms
2
Resolve all alarms not involving the busied out standby server. See the appropriate maintenance
documentation for information on how to resolve alarms.
248
NOTE:
In the Name field for location 1, call the media gateway (cabinet) Main.
and press Enter.
DATE AND TIME
Day of the Week: Friday
Day of the Month: 8
Hour: 14 Minute: 19
Daylight Savings Rule: 0
.
Cancel
Installing the Avaya S8700 Media Server with an Avaya G650 Media Gateway
field, type y.
Month: November
Year: 2002
Second: 36 Type: Standard
Daylight Savings Rule
Page 1 of 1
field.
December 2003