Administering The Ipsis; Adding Ipsi Information - Avaya S8710 Installing And Configuring

Administering the IPSIs

NOTE:
This procedure enables the IPSI circuit packs and allows them to control the port
networks.
1
Type change system-parameters ipserver-interface
change system-parameters ipserver-interface
SERVER INFORMATION
Primary Control Subnet Address: 198.152.254.
Secondary Control Subnet Address: 198.152.255.
OPTIONS
IPSI Control of Port Networks: enabled
2
Verify that the Primary and Secondary Subnet Addresses are correct.
The subnet addresses must match the most significant 3 octets (the first three groups of digits in
the subnet address) of the Server IP address.
An asterisk (*) to the right of the
displayed, it is not the correct one; Avaya Communication Manager does not have the subnet
information. After verifying the displayed information, submit this form with or without changes
to update the software with the correct subnet information.
CAUTION:
If the information displayed in the
Control Subnet Address
Use the Maintenance Web Interface; under Server Configuration and Upgrades, click
Configure Server to change the media server configuration. Then return here to perform
this step.
3
Set the
Switch Identifier:
4
Set the IPSI Control of Port Networks:
5
Press Enter to effect the change.

Adding IPSI information

NOTE:
The information you provide differs, depending on whether the IPSIs get static addresses
or they are assigned automatically through DHCP.
Installing and Configuring the Avaya S8700 or S8710 Media Server
June 2004
IP SERVER INTERFACE (IPSI) SYSTEM PARAMETERS
IPSI Host Name Prefix: vodka
Switch Identifier: A
Subnet Address
fields is not correct, it must be changed on the media servers.
field to the switch ID letter (A thru J; A is the default setting).
field to enabled.
and press Enter.
0 *
0 *
field means that although a subnet address is
Primary Control Subnet Address
Translating the IPSIs 3
Administering the IPSIs
Page 1 of 1
and/or Secondary
45