Setting Items Of [System Power Control] Window; Setting Items Of [Power Control] Window; Table A.5 Setting Items Of [System Power Control] Window; Table A.6 Setting Items Of [Power Control] Window - Fujitsu PRIMEQUEST 2000 Series Tool Reference

Appendix A List of Setting Items
Setting
Items
Mode
Reserved 10 Minutes
SB Force
Power Off
Wait
System Disable
Power
Save Control
System 8640W
Power
Saving
Threshold
A.1.5

Setting items of [System Power Control] Window

The following table lists the initial value and the value that can be set for setting items of [System Power
Control] Window.
Setting
Items
System None
Power
Control
A.1.6

Setting items of [Power Control] Window

The following table lists the initial value and the value that can be set for the setting items of [Power Control]
Window.
Setting
items
Power None
Control
Force Power Off
Off Delay
Boot No Override
Selector
Initial Value

TABLE A.5 Setting Items of [System Power Control] Window

Initial Value

TABLE A.6 Setting Items of [Power Control] Window

Initial value
Value that can be set
0~99Minutes
 Enable
 Disable
300W ~ 8640W
Value that can be set
 Power On all partition(s)
 Power Off all partition(s)
(all partitions(s) will be
automatically shutdown)
 Force Power Off
Value that can be set
 Power On
 Power Off
 Power Cycle
 Reset
 NMI
 Force Power Off
 sadump
 (Not Specified)
Time (1~9Minutes) can be
specified in case of ON
 No Override
 Force boot into EFI Boot
Manager
 Force PXE/iSCSI
 Force boot from DVD
Remarks
Can be set only when
PSU_P 200V is used
Grayed out when [System
Power Save Control] is
[Disable]
Remarks
Remarks