Select Device] Menu; Figure 6.11 [Select Device] Menu; Table 6.12 Displayed Contents Of The Help Display Area For Operation - Fujitsu PRIMEQUEST 2000 Series Tool Reference
Hide thumbs
Also See for PRIMEQUEST 2000 Series:
- Tool reference (734 pages) ,
- Administration manual (467 pages) ,
- Message reference (232 pages)
Table of Contents
Advertisement
Setting of sadump environment
TABLE 6.12 Displayed contents of the help display area for operation
Item
↑↓=Move Highlight
<Enter>= Select Entry
Note
- Don't operate [F2] key. [Esc] key is displayed on the screen but don't operate it.
- If [Commit Changes and Exit] is performed, all the selected devices, including the devices that has already
been selected previously, is being checked. If there's a selected device that is actually not present, the
device selection is automatically cleared.
6.8
[Select device] Menu
This is displayed when [1], [2] or [3] is set in the [Setting dump device] menu.
Dump devices on the current system is listed. Select a dump device from a list.
In case of multiple disk configurations, select the 1st dump disk.
Description
Move the cursor up or down.
If [1], [2] or [3] is selected, move to [Select device].
Otherwise, perform processing corresponding to the
selected item.
FIGURE 6.11 [Select device] Menu
Advertisement
Table of Contents
