Setting Items Of [System Information] Window; Setting Items Of [System Setup] Window; Table A.3 Setting Items Of [System Information] Window; Table A.4 Setting Items Of [System Setup] Window - Fujitsu PRIMEQUEST 2000 Series Tool Reference

Hide thumbs Also See for PRIMEQUEST 2000 Series:
Table of Contents

Advertisement

Appendix A List of Setting Items
End
Last event
Date/Time
Number of
100 events
events to
display
A.1.3

Setting Items of [System Information] Window

The following table lists the initial value and the value that can be set for setting items of [System
Information] Window.
Setting
items
"PRIMEQUEST" +
System
Name
Product Serial Number
Asset Tag
None
A.1.4

Setting items of [System Setup] Window

The following table lists the initial value and the value that can be set of setting items of [System Setup]
Window.
Setting
Items
Power Feed
Single
Mode
Power
Restore
Restoration
Policy
Partition
0 Seconds
Power On
Delay
Altitude
Altitude < 1000 m
PSU
Non-Redundant (When
Redundancy
Power Feed Mode is single)

TABLE A.3 Setting Items of [System Information] Window

Initial value

TABLE A.4 Setting items of [System Setup] Window

Initial Value
 Last event
 Specified Time
0 or more, integer less than
or equal to the denominator
in the fraction displayed
(Maximum 1000 events).
Value that can be set
Maximum 64 characters
can be entered [0-9], [a-z],
[A-Z],! " # $ % & ' ( ) = - ^ ~
¥ @ ´ [ ] { } : ; * + ? < > . / _
|
Maximum 32 characters
can be entered (Only
administrator privilege)
Value that can be set
 Single
 Dual
 Always off
 Always on
 Restore
 Schedule Sync
0 ~ 9999 Seconds
 Altitude < 1000 m
 1000 m <= Altitude <
1500 m
 1500 m <= Altitude <
2000 m
 2000 m <= Altitude
 Redundant
 Non-redundant
Time Data of Specified
Time.
When Specified Time is
selected, End Time can be
entered.
Switch Last event and
Specified time and maintain
Time Data of Specified
Time side.
The denominator of fraction
which is displayed is a total
number of registered
events.
Remarks
It is also used as System
Name of SNMP
Remarks
Setting error for Altitude
value can be ±100 m.
When Power Feed Mode is
Dual, fix with Redundant

Advertisement

Table of Contents
loading

Table of Contents